New Products
High-efficiency Solid Hobs
The High-efficiency
Solid Hobs are mainly used for gear cutting in the automobile
industry in large batch production, especially used in CNC high
speed hobbing machines. The hobs are made of M41, M42, M35 or
ASP30 high speed steel. The hobs have 2¡«3 times length-diameter
ratio, so compare with the normal hobs, they have more than
2 times of cutting teeth, therefore they have longer tool life
and higher cutting efficiency. The cutting speed can be retched
at 100¡«120 m/min.
Hanjiang can
supply the hobs according to GB6084, DIN3968, JIS B4354 and
ANSI B94.7 standards and special request with the profile of
pre-shaving, semi-topping, topping, and with TiN coating.
|
|
Plunge Type Shaving Cutters
Plunge Type Shaving Cutters
are mainly used for gear shaving in the automobile industry
in large batch production, especially used in CNC high speed
shaving machines. The cutters are made of M2 or ASP23 high speed
steel, they have 3¡«5 times of higher shaving efficiency compared
with normal shaving cutters, and can make any modification in
profile and lead. The cutting speed can be retched at 135¡«150
m/min. We can supply the cutters according to GB/T14333, DIN
and JIS standards, and also special request.
|
|
Gear Chamfering Cutters
Gear Chamfering Cutters are
used for gear chamfering and deburring in the automobile industry.
The cutters have two gear shaped blades made of M2 high speed
steel, they are assembled together. The cutters can deburring
both sides of the gear at the same time. We can supply the cutters
according to request.
|
|
Built-up Hobs
Built-up Hobs are produced by
the machines and technology introduced from Spain, they are
mainly used for gear cutting in the automobile industry in large
batch production, especially used in CNC high speed hobbing
machines. The blades are made of M35 high speed steel. Built-up
Hobs have longer qualified profile length, have longer tool
life and higher cutting efficiency compared with the normal
hobs. The cutting speed can be retched at 80¡«100 m/min.
Hanjiang can supply the hobs
according to GB6084, DIN3968, JIS B4354 and ANSI B94.7 standards
and special request with the profile of pre-shaving, semi-topping,
topping, and with TiN coating.
|
|
Spiral Bevel Gear Cutters
Spiral Bevel Gear Cutters are
used for cutting spiral bevel gears in automobile industry.
They are fully compatible with Gleason Spiral Bevel Gear Cutters.
We can supply the cutters of the sizes from 5"¡«12".
|
|
Connecting Rod Broaches
Connecting Rod Broaches are
used for cutting connecting rod of car engine. A set of broach
consists of 20¡«60 segments of broach. The material of broach
is M2, M41, M42, M35, ASP23 or ASP30 high speed steel, can be
coated with TiN. The cutting speed can be retched at 12¡«15 m/min,
and the cutting length can be retched at 100¡«160 m. We can supply
all kinds of connecting rod broaches.
|
|
Carbide-tipped Built-up Broaches
Carbide-tipped Built-up Broaches
are mainly used for cutting various surfaces on the parts of
car engine, a set of broach consists of 20¡«50 segments of broach.
The cutting parts of broaches are made of high quality carbide
brazed-on in vacuum, the cutting speed can be retched at 6¡«10
m/min, and the cutting length can be retched at 180¡«220 m between
sharpening. We can supply all kinds of carbide-tipped built-up
broaches on the request.
|
|
Compressor Vane Slot Broaches
Compressor Vane Slot Broaches
are used for cutting vane slots of the compressor in refrigerator
and air conditioner, usually a set of broach consists of 5¡«7
segments of broach. The broaches are made of M41, M42, M35 or
ASP30 high speed steel, have very high accuracy and very long
tool life. We can supply all kids of compressor vane slot broaches.
|
|
|